It can be frustrating when you want to move your clothes to the dryer only to discover water remains in your washing machine even after it has completed the cycle. It is an indication your washer may not be functioning correctly. How can you handle this issue? Here are a few things you can do before contacting an expert for Washing Machine Maintenance, Katy, TX:
Check your manual
Inspect the drain hose
Check for drain pump issues
Inspect for drain belt problems
Check lid switch issues
Inspect for system plumbing problems
Check Your Manual
Do you still have your washer’s troubleshooting manual? It’s time you pull it and check the error your machine is displaying. Many washing machines may work the same, but various brands may use different codes to address a specific problem. However, if you don’t have a manual or your washer doesn’t show any code, you can manually discover the problem.
Inspect the Drain Hose
A blocked drain hose is one of the common issues with washers. Access it from the back and remove it, then run some water through. It would help if you had a bucket to ensure water doesn’t run on the floor. This process forces debris out, allowing your washer to function correctly.
In some cases, you may need hose replacement. For example, if you find it’s leaking, you may want to replace it. Do you have an idea of how you can install a new one? If not, talk to professional Washing Machine Maintenance, Katy, TX experts for assistance.
Check for Drain Pump Issues
Is your pump operating, but it sounds like it is struggling? This could be due to obstruction by a piece of garment or other debris. You’ll need to stop the machine from running and drain it. Next, remove its panel and inspect the water pump. Such a problem may occur if the pump gets clogged.
Inspect for Drain Belt Problems
You can find the drive belt around the machine’s pulleys. These are at the bottom of the washer’s motor. Your washing machine may not drain water properly if the belt has cracks or doesn’t fit well on the pulleys. You can evaluate your belt and fix the problem.
Check lid switch issues
Under the washing machine’s lid, there’s a plastic switch. It senses when you close the door, letting the washer operate. Our washing machine may not drain water correctly if this switch isn’t functioning as it should. To solve this problem, ensure your washer runs, open the door, and press the button. If you don’t hear a clicking sound, it could be time you replace the switch.
Inspect for System Plumbing Problems
Drain clogs may cause water spillage and other issues like water draining back to the washer. The drain can get clogged if small fabrics accumulate in the system, but you can eliminate this problem by removing the drain's clogs. Check the presence of clogs either at the tap area or further down.
Conclusion
While a washing machine’s drainage issues can occur to anyone, no one wants to experience the inconvenience and frustration they can cause. Fortunately, you can use these reliable steps to diagnose the problem with your washer. If it’s an issue you cannot solve, don't hesitate to consult experts for Washing Machine Maintenance, Katy, TX.